Fully engineered canvas
Friends, I have had a good October, and hope that is also the case for you.
First I must say again that not-being on Instagram has been some kind of freeing up like I haven’t known since my show in 2014? Was it 2013? Ages. Anyway from then. I have a free mind. My mind is rolling
Lets get it >>>>>>>>>
You think many photos of the same thing? Correct! But these gradations of changes span weeks of contemplations so every little move feels seismic to me. A little shift here, a little shove-over-that-way and the work is transformed. So you can see that time itself is the subject.
I want to put these little houses (God’s houses) onto the canvas invisibly, no pulling or puckering. So they just kinda alight
Like this
But this is a work on canvas. How, if there is only canvas to fix them unto? Time for some thinking.
So we spent a couple of nights in Canberra seeing Boyd’s tapestries. (Went back a second time).
Random person in this photo for scale, these tapestries are bigly.
So for the hundredth time, what I want to do is have this dimensional arc of chain happening on the canvas, with no visible support (like the houses). There’d be like a blade and then chains hanging from that. Need to work out how to conceal the mechanics on the reverse & hang everything from the stretcher bars & cross braces.
Had a lot of thoughts and got some steel from Bunnings & curved it, then cut some pine to support that. This would be the blade.
Like this
I then carved the pine so it would only make contact along on edge which is glued to the canvas. I fully documented these steps thinking this is a technique I will be redeploying down the line & I want to work it right.
But subsequent to this study I determined this approach unacceptable! Because anything glued to the canvas front or back is perceptible, even with a vertical weight bearer. I want zero perception (ikr).
Also the steel curve is unnecessary, the pine is more than enough support and I dont want to drill holes through 3mm galvanised steel and anyway its not wide enough. I mean. What was I thinking? I spent ages in Bunnings looking at that steel.
But I am reminded that nothing comes from nothing and the creative process is littered with wrong metal choices.
Fun to make though & its the best way to think; just start making something, make a mistake and you’re in
But there was a fun moment in steam forming some thin ply for my blade, where the steel was actually the ideal material. Process wise I sprayed the ply with a water atomiser-thing then hit it with a hairdryer on low heat. Not saying this was a pretty or even a correct way to bend timber but it worked. Clamping the soft damp wood to cold curved steel resulted in an agreeably bent piece of ply. So not all was lost.
Findings onboard. The concept is sound. Moving on.
Time to scale shit up
But first, I fix the little houses on
Bearers fixed to bracing
In connecting the bracing to the houses, I thought that some nice brass rod, set into holes drilled into the bases of the houses, then poked through the canvas into the timber bearers behind it, would be good, because its so aesthetically nice. Love brass rod.
But then rethought (!) because if I do this right, those rods will never be seen so looks aren’t a thing. Waste of brass rod.
I dont know why I had to learn this, but screws will provide more security & versatility when making the rest of the work; this is a energetically engineered artwork, I’ll be endlessly moving around & jiggling everything and the houses would eventually wobble & droop if only on rods, which is not ok.
Screws, they will hold. I mean, this shouldn’t have been a lesson, I should’ve already just gone with screws to begin with but again I demonstrate my aptitude for overthinking with the brass rods here, and the brass rods there. I love brass rods, I get them here
And then I did it and it worked!
Tah-dah!
Haha!
Omg worked worked worked
The green one is a few mm out but because everything is kindof faceted its not detectable I think. I tempo-fixed some decorations here & there. Ideas and decisions for further down the line
Three little houses, screwed through the canvas, from the bearers behind.
Four houses in total
Basking in my success
Chain choosing paralysis
You should think about getting a digital calliper. I think its one of the best tools we’ve ever bought and its amazing how useful it is. It doesn’t have to be a super good one, although it’s better when it is, but get one. Also a little steel try-square, its workshop gold and it’ll last a lot longer than me.
Home alone
I cook this a lot, criminal amounts of sugar in it so its really good
And then, a tree came down directly opposite the Corgi house. I feel that the Corgi is implicated in this somehow. The violence etc.
Beautiful carved wooden corner brackets from my irregular third culture childhood
Aluminium wire drawings
Here we go.
And now its time for making supports to hang the chains from. It took some concentration and I experienced a deep sense of fulfilment in the work
Thinking it through
Swapped the dumb plywood blade for brass strap blade, the right metal choice, kindof embarrassed I didn’t use that in the first place. Again, but also, the path is never straight, you know? I mean mine never is but I dont know about you, I mean good luck to you if you’re making stuff like this and you know everything without having figured it out first. Process is me and its funny how sometimes the basic considerations can be brushed aside because they feel too…simple. Like it should be a bigger deal.
This beautiful brass strap is 50mm wide, heaps of surface contact with the timber curve so it’ll be securely bolted on to maintain its shape, with the exact amount of jutting-out through the canvas from which to hang the chains.
Holes are predrilled every 4mm, while studies established that 7mm jump-rings and 4x6mm curb chain will all come together in the right way
Really
beautiful
The entire contraption is fully removable, which for some reason is important to me
Cut out a section so it fits around the cross-brace.
Perfect!
Kindof looks rude?
Added the second curve.
To determine where it goes and what it looks like, I pinned some paper onto the front face of the canvas where I wanted the blade to be, drew the curved line on it and then ‘traced’ that line by pushing pins all along it and drawing across that row of pins as it appeared on the back of the canvas. Lo-tech.
Three houses, two blades, fully engineered
The third, a little one on the right-hand side
There have to be four sets of chain. Haven’t decided the fourth one yet. I’m waiting on delivery of more chain, my original estimate was way out, how surprise. I should've outsourced the adding the numbers. Anyway I want to confirm the placement of the fourth once I have these three fully set
Like a wound
There were many lithographs and tapestries in the Boyd exhibition at NGA. These two in particular look so much like life at home following my father’s suicide and my mother’s catastrophic grief, like a freakin bullseye. One of my brothers now lives in Canberra so we had dinner together, I showed him this and he shuddered, full body horror although we agreed it was much worse than that and it went on for years. She remarried and it got worse, so much worse. It shouldn’t have been allowed to happen, what happened to us.
Beautiful blade of chain. Just needs trimming.
Showing the support structure behind
First set of chains sorted. Seen here without the brass strip bolted down, so it sticks out a little awkwardly and the chains rest against the canvas because its on an incline so reserve judgement yeah
Then because really getting out & about now, we did Sydney Open which included the Masonic Centre in the city. Very interesting. There was a lot of information on display and an exhibition of aggressively decorative uniforms and ….CHAINS. AND GOLD. OMG.
I will examine the theory and think about it
The Masonic Centre “Great Chandelier”, the whole ceiling apparatus is a chandelier! And the suspended “G”, being for God. I can get behind these ideas 100%
Not dirty, just messy.
Happy month-ahead wishes to all, I am feeling so much better and I thank you for your silent company :)